Ever opened-up a faulty hard-disk to see what’s inside? It looks pretty cool, and you can get some very strong neodymium magnets out of it. SWAG!
Another cool usage is to display the opened hard-disk on your wall or desk, as art.
Ikea comes to the rescue. Did you know that you can fit a 3.5″ hard disk in a Ribba 15cm x 20cm? Me neither. Also, you can fit two of the small-factor hard disks in the Ribba 12cm x 17cm
You can use two-sided tape to hold them in place, or use the mounting screws like I did. You then fix the back to the frame with some black electrical tape.
My old Bench PSU had died and I needed a new one for my water-gun project (Work in progress), so it was a good time to document the process as well for the benefit of others.
List of materials.
- A discarded computer Power Supply Unit. (PSU)
- At least 2 terminals
- 2-state flip switches
- A 12v fan
- an on-off rocker switch
- LCD Voltage meter (Optional)
- Sandpaper & Paint (Optional)
My Donor PSU has a large 120mm fan on top of it that is not very useful. It takes up all the space. It had to go. As a replacement I used the top off another PSU with no top fan. The dimensions are the same anyway.
First step is to open it up as see what we got.
I’ve always wanted to build my own custom PC case.
Ever since I randomly stumbled upon the mini-itx.com website I got hooked. I saw all of the mods that other people submitted over the years and I wanted to build my own. I specially liked the army themed ones such as the Ammo Box and the AmmoLAN. I had an ammo box lying around that I used to house all of my audio cds. It was about time it got a new purpose.
The new system would act as a Home Theater PC (HTPC) and keep company to my new 32″ Full HD TV. For that it would have to be powerful enough to play Blue-ray and some video games. I read some positive reviews on the new Zotac ION ITX-A, plus it has an external brick-type UPS for space economy and less heat.
Zotac Ion ITX-A ————————–>175 euros (Delivery costs included)
Sony AD-7670S Slim DVD —————>46 euros
Seagate Barracuda 320GB —————->39 euros
Kingston PC6400 800Mhz 2GB ———->27 euros
Trust Wireless Keyboard & Mouse –>27 euros
TOTAL 314 EUROS
Bits & Pieces
2x light bulbs ————————> 2 euros
Valdal-proof Switch —————->7.40 euros
Key-switch ————————-> 4 euros
2x Flip toggle switches ————-> 2 euros
Tiny reset switch ——————->0.60 euros
Cables —————————–>0.15 euros
2x 40mm Fan Guards ————->1.2 euros
80mm Fan Guard —————–>2 euros
4x M3 Stand-offs —————–>1 euro
mini-sata to sata cable ————->5 euros
HDMI v3 Gold cable ————–>7 euros
TOTAL 32.2 EUROS
Solder Iron ——————>8 euros
Solder Flux ——————>1.6 euros
Hot Glue Gun —————>3.50 euros
Masking Tape—————>1 euro
Dremel-Type Rotary tool —>30 euros
Set of Dremel bits ———-> 7 euros
TOTAL 51.1 EUROS
I started by measuring the mobo and the ammo case. It seems it could fit. the height of the mobo matches exactly the height of the box. 17cm. It’s gonna be a close fit. I made a paper mock-ups to arrange all the parts inside the box and figure out where to put each part.
Next step was to plug everything, cross my fingers and hope that everything works out of the box. A very critical step to the overall success.
On the side it’s marked: “Fuze PD M557 Boostered” and on the top: “Explosives Class C” a little bit of googling revealed that it’s purpose was to store fuses for 105mm artillery rounds.
In the past, (Before 9-11) I had a lot of fun at airports with this thing as carry-on baggage. The stares I would get from security staff…
Now lets get that dremel working. For the ports on the back, I didn’t want to use the I/O shield that most of mods use because it would look too much like a PC. I just cut enough steel for the ports to slip through.
The I/O shield came handy to mark the spot for cutting.
I started off by cutting the front handle. It was the first time I was handling a dremel tool so I needed the practice. The front handle was totally useless and it was making a clinking noise when moving the case around, plus I needed the space, so it had to go.
The carbon cutting disk cut it like butter.
Largo from Megatokyo webcomic says that you have to hack naked so who am I to defy him?
I also own (or should I say p0wN) this awesome t-shirt
Here are the first holes my dremel skillz are improving really slowly.
Now for some soldering skills. Again, It’s my first time with a soldering iron. I needed to wire fans, Switches, and status leds. Starting from the fans, the system is ment for my bedroom so it has to be extra silent. It will also be permanently on, so good air flow is a must too. At first I thought of putting 40mm fans. 2 on the back and 2 on the lid.
The disadvantage of 40mm fans over bigger ones is that they produce more noise, so instead of 2 + 2, I used one 80mm on the back, blowing air in, and two 40mm on the top, blowing hot air out.
I don’t have a multimeter so a peek under the label reveals the polarity. (At the time I didn’t think about cables color coding)
So as you probably suspected, the red wire is the positive, and the black is negative or ground. The blue one is the RPM sensor that I don’t need it at the moment, so off it goes. All 3 fans are 12v and they have the small 3 pin connector. The one that connects to the motherboard so that the system controls the RPMs. Off with those too. Now… where to solder them? The sata power molex is basically the same as the standard molex. yellow is +12V, red is +5V, and the 2 black cables are ground.
At first I connected all of the fans in series, but that didn’t work very well as the voltage was reduced with each device I added. Makes sense to those who actually paid attention in physics class.
So I de-soldered everything and connected them in parallel.
I then wired 2 flip-switches to kill the power to the inbound or outbound airflow individually.
Everyday I could only cut for 4 hours from 5pm to 9pm so I wouldn’t annoy the neighbors with all the noise. Add to that the much needed planning time, and it took me weeks to cut and sand everything.
Next stage was to cut 3 blow holes. I started with the 80mm one on the back.
The hole saws were too expensive so I had to do it with the dremel.
I masked the area with masking tape to protect it from random “oops” slip-offs. (I learn from my mistakes)
Next was the lid 40mm holes. That was a royal pain in the 4$$ ! ! !
The steel on the lid was double! I don’t mean just thicker, it actually consists of 2 steel plates. That made it super tough to carve a proper smooth circle. I should have bought the hole saws after all.
The rubber molding covers perfectly the imperfections. I had to force the 2 metal plates together with a pair of pliers otherwise it wouldn’t fit.
Here you can see the HDD mounted on the side, the holes for status LEDs, flip switches, reset switch and the rubber molding DVD slot. The batteries are hot-glued to the bottom. I needed some way to line up the drive with the slot because of bad measuring. Also I had to place the DVD-drive upside-down because its right side corner would touch the motherboard. Amazingly it works even upside-down.
Everything plugged-in. The motherboard upper side sits just on the edge of the box. They have the exact same height of 17cm. It was a gamble but it fits. I tried to manage the cable-spaghetti a bit to get better airflow and that’s the best I could do. It’s breezy in there.
That was the point where I got so excited with the project that I forgot to take pictures of the process.
When I trie dto close the lid I realized that the lid hits the motherboard screws and stops it from closing. I remedied it with a little bit dremeling.
I wanted to mount the mobo, HDD, DVD and fans with M3 screws so I cut them to appropriate lengths. I later found out that M3 doesn’t work with internal components. It’s a good thing I had a bunch of spare screws from random PCs. I used the M3 screws and M3 nylon nuts to mount the fans. It was very had to keep the nut in place while screwing. (This doesn’t sound right…)
I added a key switch. I order to power-on the PC, you have to turn the key to on, and then push the start switch. The key disables the power switch by opening the circuit. I wanted to imitate the 2 key-safety feature of nuclear weapons. If the key-switch is off, you can’t power-off the system either.
Fron view. In that hole you can see the reset switch. I put it there to avoid accidental resets. On the left we got the fan flip-switches, and on the right the HDD activity status and power-on status. I used 3v light bulbs instead of LEDs to give a more old-school look. When inserting a disk you have to remember to put it upside-down
I wanted to mount a regular sized DVD drive vertically, but unfortunately it didn’t fit, and it wouldn’t look good anyway with a tray protruding even with the bezel removed. So I opted for the much more expensive slimline slot drive. I was hoping to cut a thin line on the front of the case to eject the DVDs and stealth the drive behind it. Turns out dremel tools aren’t that precise. At least not in my hands. The line ended up being quite thick so I had to resolve to rubber molding around the edges to make the slot appear thinner, and protect DVDs from getting scratched.
And finally the finished product
I also added XBMC to enhance the home theater experience. Works like a charm.
Why it’s a bad idea to cut steel on the balcony:
All the metal trimings that graciously lie on the balcony floor, once they get wet from the rain, they start to rust. And boy do they rust FAST. I got rust everywhere on the floor and the GF went mental so I had to scrub and scrub with acid solution.
Next time I’ll do it in the basement and vacuum the place real good.
Feel free to leave comments negative or positive, or suggestions.